SMBJ170A-E3/52 Peak pulse power 600W Stand-off Voltage 17V VISHAY
For surface mounted applications in order to optimize board space.
Polarity: Color band denoted positive end (cathode) except
Typical failure mode is short from over-specified voltage or
High Temperature soldering:260°C/10 seconds at terminals.
Terminal: Solder plated, solderable per MIL-STD-750,Method 2026.
The SMB-H series is designed to protect voltage sensitive
high voltage, high energy transients. They have excellent clamping
surge capability, low zener impedance and fast response time. The
SMB-H series is
supplied in YINT Semiconductor’s exclusive, cost-effective, highly
reliable and is
ideally suited for use in communication systems, automotive,
process controls, medical equipment, business machines, power
supplies and many
other industrial/consumer Applications.
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom, Computer,
and Consumer electronic applications.
1. Non-repetitive current pulse, per Pulse Waveform graph and
derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per
minute (unidirectional units only).
4. Single Phase, Half Wave, 60 Hz, resistive or inductive load. For
capacitive load, derate current by 20 %.
5. VF<3.5V for VBR< 200V and VF <5.0V for VBR> 201V.
Deli electronics tehcnology Co.,Ltd